Quality: Silicone Paint, propellants propane-butane, lead free, cadmium-,-aromatic
Finish: Matt under 10% at 60 ° angle
Hochtemperaturlack is heat resistant at constant temperatures up to 300 ° Celsius (all colors) and at temperatures up to 650 ° Celsius (aluminum, black, white, anthracite).
With Hochtemperaturlack you achieve excellent results in the renovation of radiators, heating ducts, furnaces and exhaust systems.
Please ensure that no primer is used and no chrome parts are painted.
Do not use on polystyrene, PVC and vinyl-containing polymers.
High temperature paints are extensively dry instantly, not to run, thus ensuring a quick, clean operation for interior and exterior paint.
.
Oops! Painted parts two hours after spraying to a minimum 150 ° Celsius to bring to the paint reaches its final hardness. Do not use primer.
Before and during use:
· At thoroughly cleaned and dry surfaces apply. Areas of oil, grease, wax, rust, etc. Clean well.
· Area cover, which should not be sprayed. Sample spraying!
· Shake vigorously until the mixing balls move freely, while repeated use.
• In the interval 25-30 cm always parallel to the work object in the cloister spray, no hesitation, to avoid bubbles and Farbläufe. Ideal temperature of 20 ° C.
· Several thin coats give a better result than one thick layer, which can cause Farbläufe. wait between the individual layers of about 10 minutes.
After use:
Very important: To clean the spray nozzle the can upright, according to the spray head down, as long as pressed until only propellant escapes no dye. Clogged nozzle off of the can and release it with a needle.
