High quality Acrylharzlack, propellants propane-butane, lead free, cadmium-,-aromatic
Hammerschlag sprays highlight the artistic beauty of good craftsmanship. Hammerschlag Spray gives the object to be painted a layer effect, creating the impression that the surface would have been edited with a hammer.
- Weatherproof
- Corrosion proof
- Quick, clean operation
- For interior and exterior paint
Oops! The hammer effect can be optimized in the first an opaque layer is applied and after a short min drying time (1-2) a saturated layer is applied at a closer distance.
Before and during use:
· At thoroughly cleaned and dry surfaces apply. Areas of oil, grease, wax, rust, etc. Clean well. To ensure the best possible adhesion when Übersprayen, we recommend Sparvar primer.
· Area cover, which should not be sprayed. Sample spraying!
· Can shake vigorously until the mixing balls move freely, while repeated use.
• In the interval 25-30 cm always parallel to the work object in the cloister spray, no hesitation, to avoid bubbles and Farbläufe. Ideal temperature of 20 ° C.
After use:
Very important: To clean the spray nozzle the can upright, according to the spray head down, as long as pressed until only propellant escapes no dye. Clogged nozzle of the can and then remove with a needle opening
