Finish: Gloss 90% at 60 ° angle
Drying: - Dust dry: 50-10 minutes
- Touch dry: 30-40 minutes
- Dry hard: about 24 hours
For indoor and outdoor
weather-and corrosion-resistant
Applications:
RAL Colour sprays industry standard RAL.
As has been realized in this product group of particularly high quality demands in color matching, it is possible, large painted objects that were easily damaged during installation or repair postprocess immediately in the corresponding RAL color.
Inspiring final painting with lasting color intensity for metal, wood, masonry and most plastic materials.
Wherever color is needed for repainting, restoration, repairs.
Do not use on polystyrene and vinyl-containing polymers.
RAL acrylic paints are thoroughly dry immediately after not running, thus ensuring a quick, clean operation
Before and during use:
· At thoroughly cleaned and dry surfaces apply. Areas of oil, grease, wax, rust, etc. Clean well.
· Area cover, which should not be sprayed. Sample spraying!
· Can shake vigorously until the mixing balls move freely, while repeated use.
• In the interval 25-30 cm always parallel to the work object in the cloister spray, no hesitation, to avoid bubbles and Farbläufe. Ideal temperature of 20 ° C.
· Several thin coats give a better result than one thick layer, which can cause Farbläufe. wait between the individual layers of about 10 minutes.
After use:
Very important: To clean the spray nozzle the can upright, according to the spray head down, as long as pressed until only propellant escapes no dye. Clogged nozzle off of the can and release it with a needle.
